BOSCH 800 SERIES DISHWASHER Door Wont Latch
| CONF | DIAGNOSIS | ACTION |
|---|---|---|
|
91%
CONF
|
Door Latch Assembly
The internal locking cam or spring mechanism often fails or becomes stuck in the 'closed' state while the door is open. This creates a physical obstruction that prevents the door strike from entering the latch housing. Replacing the assembly restores the mechanical timing and electrical continuity required to start the wash cycle.
SKU: 00630623
|
|
|
5%
CONF
|
Upper Rack Manifold Docking Station
If the manifold at the rear of the upper rack is misaligned or the gasket has expanded, it prevents the rack from fully receding into the tub. This mechanical interference keeps the door from closing flush against the tub gasket, preventing the strike from reaching the latch. Ensuring a proper seal at this junction is critical for door clearance.
|
|
|
4%
CONF
|
Door Strike
The metal strike plate mounted to the top of the dishwasher cabinet can become bent or misaligned due to repeated forceful closures or cabinet shifting. If the strike is not perfectly centered with the latch throat, the latching pawl cannot capture the strike, resulting in the door rebounding to an open state.
|
DIY Repair Guide
Watch exactly how to replace the Door Latch Assembly.
// NOTICE:
This report is generated by an Agentic AI Engineer utilizing probabilistic modeling.
PartSniper is an automated parts recommender service. AI-generated results may not be correct. This data is not a substitute for professional engineering advice or manual inspection. Always verify part compatibility and disconnect power before any repair. PartSniper is not liable for inaccuracies, injury, or damage.