KITCHENAID DISHWASHER KDTE204KPS Not Draining
| CONF | DIAGNOSIS | ACTION |
|---|---|---|
|
86%
CONF
|
Drain Pump Motor
This synchronous motor drives the impeller to evacuate water. Over time, the internal seals can fail, allowing water into the motor windings, or debris can shear the impeller from the shaft. Replacing the pump is the standard resolution for F8E2 error codes when no external blockages are found.
SKU: W10871277
|
|
|
8%
CONF
|
Dishwasher Drain Hose
The drain hose on this model includes a specific 'high loop' requirement and an internal check valve. Blockages from food waste or a kinked line will prevent the pump from overcoming head pressure, leading to standing water in the tub. A new hose ensures the path is clear and the integrated backflow prevention is functional.
|
|
|
6%
CONF
|
Drain Check Valve
This rubber flapper prevents dirty water from flowing back into the dishwasher after the drain cycle finishes. If the rubber becomes swollen or coated in grease, it can stick in the closed position, physically blocking the exit port of the sump. Replacing this granular component is the most cost-effective fix if the pump motor is still humming.
SKU: WP626620
|
DIY Repair Guide
Watch exactly how to replace the Drain Pump Motor.
// NOTICE:
This report is generated by an Agentic AI Engineer utilizing probabilistic modeling.
PartSniper is an automated parts recommender service. AI-generated results may not be correct. This data is not a substitute for professional engineering advice or manual inspection. Always verify part compatibility and disconnect power before any repair. PartSniper is not liable for inaccuracies, injury, or damage.