KITCHENAID KDTM354DS Not Filling With Water
| CONF | DIAGNOSIS | ACTION |
|---|---|---|
|
93%
CONF
|
Water Inlet Valve
The water inlet valve uses an electromagnetic solenoid to actuate a rubber diaphragm. Over time, the solenoid coil can suffer an internal break from thermal cycling, or calcium deposits can physically jam the plunger. This prevents the valve from opening even when receiving the proper signal from the control board, resulting in a dry tub.
SKU: WPW10327249
|
VIEW ON AMAZON
#CommissionsEarned
|
|
4%
CONF
|
Overfill Float Switch
This switch is a safety interlock designed to prevent flooding. If the mechanical float becomes stuck in the 'up' position due to food debris or grease buildup, the microswitch stays open, cutting off power to the water inlet valve. Replacing or cleaning the switch restores the electrical path required for the fill cycle.
SKU: WPW10195039
|
VIEW ON AMAZON
#CommissionsEarned
|
|
3%
CONF
|
Door Latch Assembly
The door latch assembly contains microswitches that must be physically closed to signal the control board that the unit is sealed. If the mechanical strike or the internal switches fail, the machine's logic inhibits the fill sequence as a safety precaution to prevent external water leakage. A new latch ensures consistent electrical continuity during the start-up sequence.
SKU: W10616799
|
VIEW ON AMAZON
#CommissionsEarned
|
DIY Repair Guide
Watch exactly how to replace the Water Inlet Valve.
// NOTICE:
This report is generated by an Agentic AI Engineer utilizing probabilistic modeling.
PartSniper is an automated parts recommender service. AI-generated results may not be correct. This data is not a substitute for professional engineering advice or manual inspection. Always verify part compatibility and disconnect power before any repair. PartSniper is not liable for inaccuracies, injury, or damage.