KITCHENAID KDTM354DSS Not Cleaning
| CONF | DIAGNOSIS | ACTION |
|---|---|---|
|
93%
CONF
|
Diverter Motor
The diverter motor governs the distribution of water to the upper and lower spray arms via a rotating disc. Mechanical failure of the motor or the coupling prevents the disc from aligning with the upper wash zone port, resulting in a total loss of cleaning action for the top rack while the bottom may continue to function. This is a high-frequency failure point in the Whirlpool-built hydraulic architecture.
SKU: W10537869
|
VIEW ON AMAZON
#CommissionsEarned
|
|
4%
CONF
|
Circulation Pump
The circulation pump is the heart of the hydraulic system, utilizing a centrifugal impeller to pressurize water. If the impeller vanes are obstructed by debris or have undergone thermal deformation, the pump cannot generate the vertical head pressure required to effectively reach and rotate the upper spray arms. This leads to poor water coverage and 'not cleaning' symptoms in the highest elevations of the tub.
SKU: W11032770
|
VIEW ON AMAZON
#CommissionsEarned
|
|
3%
CONF
|
Water Feed Tube Manifold
This assembly delivers water from the base to the upper wash zones. If the docking seal where the top rack connects to this tube is compromised or the plastic housing has developed stress fractures, hydraulic pressure escapes into the tub volume rather than through the spray nozzles. This bypass significantly reduces the kinetic energy of the water intended for the top rack items.
|
VIEW ON AMAZON
#CommissionsEarned
|
DIY Repair Guide
Watch exactly how to replace the Diverter Motor.
// NOTICE:
This report is generated by an Agentic AI Engineer utilizing probabilistic modeling.
PartSniper is an automated parts recommender service. AI-generated results may not be correct. This data is not a substitute for professional engineering advice or manual inspection. Always verify part compatibility and disconnect power before any repair. PartSniper is not liable for inaccuracies, injury, or damage.