KITCHENAID KDTE204KPS Dead No Lights
| CONF | DIAGNOSIS | ACTION |
|---|---|---|
|
93%
CONF
|
Main Control Board
The main control board manages the power conversion from house AC to the DC voltage required by the electronics. A failure in the board's internal power supply circuit prevents the logic system from booting, resulting in a 'dead' state with no LED response. This is the primary failure point for KitchenAid dishwashers that show no signs of life.
SKU: W11553073
|
|
|
4%
CONF
|
User Interface Control
The User Interface (UI) is the physical board containing the LEDs and buttons. If the main board is sending power but the UI has an internal short or a failed communication processor, the display will remain dark. This component is susceptible to moisture intrusion and steam-related corrosion over time.
SKU: W11452140
|
|
|
3%
CONF
|
Door Latch Assembly
The door latch assembly contains microswitches that signal the control board that the unit is safely sealed. While a failed latch usually allows the lights to stay on while preventing start, certain failure modes on the control logic can cause the unit to remain in a deep sleep or 'locked' state if the latch circuit remains open or grounded.
SKU: W11307442
|
DIY Repair Guide
Watch exactly how to replace the Main Control Board.
// NOTICE:
This report is generated by an Agentic AI Engineer utilizing probabilistic modeling.
PartSniper is an automated parts recommender service. AI-generated results may not be correct. This data is not a substitute for professional engineering advice or manual inspection. Always verify part compatibility and disconnect power before any repair. PartSniper is not liable for inaccuracies, injury, or damage.