KITCHENAID KDTE204KPS Wont Start Blinking Light
| CONF | DIAGNOSIS | PART MATCH | ACTION |
|---|---|---|---|
|
85%
CONF
|
Door Latch Assembly
The door latch assembly contains the microswitches responsible for sending the 'closed' signal to the main logic board. If the plastic housing warps or the internal switches fail, the machine cannot verify the door is sealed, preventing cycle initiation and triggering a blinking indicator light as a safety error. This is a common failure point due to repetitive mechanical stress and moisture exposure.
|
|
CHECK PRICE |
|
10%
CONF
|
Main Control Board
The electronic control board processes the input signals from the UI and door latch. If the onboard relay for the wash motor fails or if the microprocessor hangs in an error state (often indicated by persistent blinking), the board must be replaced to restore the logic sequence required to start a cycle.
|
|
CHECK PRICE |
|
5%
CONF
|
User Interface (UI) Console
Corrosion on the ribbon cable or internal short-circuiting of the capacitive touch buttons can cause the 'Start' command to be ignored. If the UI cannot send the specific start signal to the main board, the machine will remain in standby or error mode with blinking LEDs.
|
|
CHECK PRICE |
DIY Repair Guide
Watch exactly how to replace the Door Latch Assembly.