WHIRLPOOL WASHER WFW5620 VIOLENT Shaking
| CONF | DIAGNOSIS | ACTION |
|---|---|---|
|
86%
CONF
|
Washer Shock Absorber Kit
The WFW5620 relies on four friction dampers to isolate tub movement from the outer cabinet. When the internal grease or friction pads inside these shocks wear out, the tub oscillates freely during the spin cycle, leading to cabinet impact or 'walking.' Replacing all four dampers restores the dampening ratio required to handle heavy, wet loads at high RPM.
|
|
|
10%
CONF
|
Suspension Springs
These springs support the weight of the drum from the top of the frame. If a spring has stretched or the plastic mounting insert has failed, the tub sits at an eccentric angle, causing an immediate unbalance condition that the software cannot always compensate for, resulting in violent vibration.
SKU: W10435221
|
|
|
4%
CONF
|
Shipping Bolt Kit
If the unit is a recent installation or was recently moved, the shipping bolts may not have been removed from the rear panel. These bolts rigidly lock the tub to the frame for transport; if left in, the machine will vibrate violently because the suspension system is completely bypassed.
SKU: W10281397
|
DIY Repair Guide
Watch exactly how to replace the Washer Shock Absorber Kit.
// NOTICE:
This report is generated by an Agentic AI Engineer utilizing probabilistic modeling.
PartSniper is an automated parts recommender service. AI-generated results may not be correct. This data is not a substitute for professional engineering advice or manual inspection. Always verify part compatibility and disconnect power before any repair. PartSniper is not liable for inaccuracies, injury, or damage.