WHIRLPOOL WRX735SDHZ Ice Maker Not Working
| CONF | DIAGNOSIS | ACTION |
|---|---|---|
|
91%
CONF
|
Ice Maker Assembly
This modular unit contains the harvest motor, mold heater, and ejector blades. In door-mounted systems, the internal motor gears or the thermostat often fail, preventing the harvest cycle even if the freezer temperature is within the nominal range.
SKU: W11658802
|
|
|
5%
CONF
|
Door Wiring Harness (Hinge Area)
The harness passing through the upper left door hinge is subject to torsional fatigue. Fractured wires at this pivot point interrupt the 12VDC/120VAC signals required for the ice maker to sense the bin level or initiate a fill, effectively disabling the system while other door functions may remain intermittent.
|
|
|
4%
CONF
|
Dual Water Inlet Valve
This component uses an electromagnetic solenoid to control water flow to the ice maker mold. If the solenoid coil fails or the internal diaphragm is obstructed by mineral scale, the ice maker will attempt a harvest cycle but will fail to produce cubes due to a lack of water supply.
SKU: W11165546
|
DIY Repair Guide
Watch exactly how to replace the Ice Maker Assembly.
// NOTICE:
This report is generated by an Agentic AI Engineer utilizing probabilistic modeling.
PartSniper is an automated parts recommender service. AI-generated results may not be correct. This data is not a substitute for professional engineering advice or manual inspection. Always verify part compatibility and disconnect power before any repair. PartSniper is not liable for inaccuracies, injury, or damage.