WHIRLPOOL WFE505W0H Burner Not Lighting
| CONF | DIAGNOSIS | ACTION |
|---|---|---|
|
91%
CONF
|
Radiant Surface Element
The heating element contains a coiled ribbon of resistive wire embedded in a ceramic insulated tray. Over time, thermal cycling causes microscopic fractures or 'hot spots' in the metal, leading to a physical break in the circuit (open circuit). This prevents current flow regardless of the switch position, resulting in a cold burner.
SKU: WPW10242947
|
|
|
5%
CONF
|
Surface Burner Infinite Switch
The infinite switch uses an internal bimetallic strip and a small heater to cycle the burner on and off to maintain temperature. The internal electrical contacts can become pitted or carbonized due to arcing during standard operation. Eventually, the contacts fail to close, preventing voltage from reaching the radiant element.
SKU: WPW10434452
|
|
|
4%
CONF
|
Radiant Element Wiring Harness Kit
The high-amperage draw of the radiant element generates significant heat at the terminal connection points. If the female spade connectors lose tension, resistance increases, leading to localized overheating and eventual melting or oxidation of the wire lead. This breaks the electrical path between the switch and the element.
SKU: WPW10443425
|
DIY Repair Guide
Watch exactly how to replace the Radiant Surface Element.
// NOTICE:
This report is generated by an Agentic AI Engineer utilizing probabilistic modeling.
PartSniper is an automated parts recommender service. AI-generated results may not be correct. This data is not a substitute for professional engineering advice or manual inspection. Always verify part compatibility and disconnect power before any repair. PartSniper is not liable for inaccuracies, injury, or damage.