WHIRLPOOL DUET WASHER Error Code
| CONF | DIAGNOSIS | ACTION |
|---|---|---|
|
91%
CONF
|
Drain Pump Motor Assembly
The drain pump relies on a centrifugal impeller to evacuate water. If the motor windings have increased resistance or the impeller has suffered mechanical separation from the shaft, the flow rate drops below the threshold required to empty the tub within the MCU's 8-minute timeout window.
SKU: W10536347
|
|
|
5%
CONF
|
Water Level Pressure Switch
This switch translates the pneumatic pressure from the air dome into an electrical signal. If the internal diaphragm is ruptured or the contacts are fouled, the MCU will continue to receive a 'full' signal even if the water has physically drained, resulting in a false F21 fault.
SKU: WPW10448876
|
|
|
4%
CONF
|
Corrugated Drain Hose
Internal accumulation of lint and detergent sediment can create a restrictive bottleneck. This increased head pressure forces the pump to work harder, slowing the volumetric flow rate and preventing the machine from clearing the water level sensor within the programmed logic window.
SKU: WPW10114608
|
DIY Repair Guide
Watch exactly how to replace the Drain Pump Motor Assembly.
// NOTICE:
This report is generated by an Agentic AI Engineer utilizing probabilistic modeling.
PartSniper is an automated parts recommender service. AI-generated results may not be correct. This data is not a substitute for professional engineering advice or manual inspection. Always verify part compatibility and disconnect power before any repair. PartSniper is not liable for inaccuracies, injury, or damage.