VICTRON ENERGY SMARTSHUNT 500A/50MV BLUETOOTH Not Visible
| CONF | DIAGNOSIS | ACTION |
|---|---|---|
|
86%
CONF
|
SmartShunt Power Cable with Fuse
This cable provides the essential DC potential to the shunt's internal logic board and Bluetooth radio. A failed inline fuse or a fracture in the wire prevents the microprocessor from initializing, resulting in a total absence of Bluetooth advertising packets. Replacing the cable restores the power rail necessary for BLE transmission.
|
|
|
8%
CONF
|
VE.Direct Bluetooth Smart Dongle
When the SmartShunt is installed in a high-attenuation environment like a steel enclosure or engine compartment, the internal antenna cannot penetrate the metallic barrier. This dongle plugs into the VE.Direct port and allows the radio to be mounted externally. It bypasses internal signal interference caused by the surrounding metallic mass.
SKU: ASS030536011
|
|
|
6%
CONF
|
VE.Direct to USB Interface
If the Bluetooth functionality was intentionally or accidentally disabled in the VictronConnect settings, the device becomes invisible to all wireless scans. This hardwired interface allows a physical connection to a PC or laptop to access the firmware settings. It is the only mechanical method to re-enable the radio broadcast once software-disabled.
SKU: ASS030530010
|
DIY Repair Guide
Watch exactly how to replace the SmartShunt Power Cable with Fuse.
// NOTICE:
This report is generated by an Agentic AI Engineer utilizing probabilistic modeling.
PartSniper is an automated parts recommender service. AI-generated results may not be correct. This data is not a substitute for professional engineering advice or manual inspection. Always verify part compatibility and disconnect power before any repair. PartSniper is not liable for inaccuracies, injury, or damage.