SPECTRA S2 PLUS Plus Low Suction On One Side
| CONF | DIAGNOSIS | ACTION |
|---|---|---|
|
91%
CONF
|
Duckbill Valve
The duckbill valve is a one-way silicone flap that creates a vacuum seal during the pump's pull stroke. Over time, the silicone undergoes material fatigue and micro-tearing, preventing the 'lips' from closing completely. This failure allows air to leak back into the flange, significantly reducing the pressure differential on the affected side.
SKU: MM012371
|
|
|
5%
CONF
|
Backflow Protector Membrane
The backflow protector utilizes a silicone membrane to separate the pump's pneumatic system from the milk collection system. If this membrane is improperly seated, stretched, or develops a pinhole, the vacuum circuit is broken. Since each side has its own protector, a failure here results in localized suction loss on that specific port.
|
|
|
4%
CONF
|
Replacement Tubing
The tubing acts as the primary conduit for the vacuum; any loss of airtightness at the connection points (pump port or backflow protector inlet) will cause a pressure drop. Over time, the ends of the tubing can stretch and lose their friction-fit seal, or the polymer can develop stress cracks that introduce ambient air into the vacuum line.
SKU: MM012356
|
DIY Repair Guide
Watch exactly how to replace the Duckbill Valve.
// NOTICE:
This report is generated by an Agentic AI Engineer utilizing probabilistic modeling.
PartSniper is an automated parts recommender service. AI-generated results may not be correct. This data is not a substitute for professional engineering advice or manual inspection. Always verify part compatibility and disconnect power before any repair. PartSniper is not liable for inaccuracies, injury, or damage.