SAMSUNG WA50R5400AW/US Wont Fill
| CONF | DIAGNOSIS | ACTION |
|---|---|---|
|
93%
CONF
|
Water Inlet Valve Assembly
This assembly contains multiple solenoids that control the flow of hot and cold water; the internal electromagnetic coils are prone to open-circuit failure due to thermal stress. When the coil fails, it can no longer generate the magnetic field required to lift the plunger and open the rubber diaphragm. This results in a complete lack of water ingress despite the control board providing the necessary signal.
SKU: DC97-15459H
|
|
|
4%
CONF
|
Water Level Pressure Sensor
This sensor converts air pressure from the tub into a frequency signal for the main PCB. If the internal transducer fails or the diaphragm becomes brittle, it may send a high-frequency signal that erroneously indicates a 'full' state. The machine logic then prohibits the fill cycle from starting to prevent a theoretical overflow event.
SKU: DC96-01703G
|
|
|
3%
CONF
|
Water Inlet Mesh Filters
These fine-mesh screens are situated at the hose connection points of the inlet valve to protect the internal diaphragms from sediment. Over time, calcium carbonate buildup or pipe scale can completely occlude the mesh, creating a mechanical barrier that prevents water from entering the machine regardless of solenoid actuation.
|
DIY Repair Guide
Watch exactly how to replace the Water Inlet Valve Assembly.
// NOTICE:
This report is generated by an Agentic AI Engineer utilizing probabilistic modeling.
PartSniper is an automated parts recommender service. AI-generated results may not be correct. This data is not a substitute for professional engineering advice or manual inspection. Always verify part compatibility and disconnect power before any repair. PartSniper is not liable for inaccuracies, injury, or damage.