SAMSUNG RF28HMEDBSR Error 8E Fix
| CONF | DIAGNOSIS | ACTION |
|---|---|---|
|
92%
CONF
|
Ice Maker Assembly
The 8E code specifically denotes a failure in the ice maker's internal thermistor. Because this sensor is integrated into the mold assembly, the entire unit must be replaced to ensure the control board receives accurate temperature data for ice harvest cycles. This part includes the motor, tray, and the failing sensor.
SKU: DA97-15217D
|
|
|
5%
CONF
|
Main Power Control Board
If the ice maker assembly is replaced and the error persists, the logic gates on the main PCB responsible for interpreting the thermistor's resistance may be damaged. This represents a breakdown in the signal processing stage of the refrigerator's control system.
|
|
|
3%
CONF
|
Door Wire Harness
Repeated mechanical stress on the wiring located within the door hinge can lead to fatigue-induced fractures in the copper conductors. A break in the specific line dedicated to the ice maker sensor will mimic a sensor failure by creating an 'infinite resistance' (open circuit) state.
|
DIY Repair Guide
Watch exactly how to replace the Ice Maker Assembly.
// NOTICE:
This report is generated by an Agentic AI Engineer utilizing probabilistic modeling.
PartSniper is an automated parts recommender service. AI-generated results may not be correct. This data is not a substitute for professional engineering advice or manual inspection. Always verify part compatibility and disconnect power before any repair. PartSniper is not liable for inaccuracies, injury, or damage.