SAMSUNG RANGE NX60A6511 BURNER NOT LIGHTING Repair
| CONF | DIAGNOSIS | ACTION |
|---|---|---|
|
95%
CONF
|
Gas Valve Wiring Terminal / Connector
The broiler igniter is not glowing red, indicating a lack of power. While the igniter itself was replaced, the issue persisted. Inspection revealed a loose electrical connection at the gas valve. This loose connection interrupts the 120V supply required for the igniter to heat and open the gas valve. Re-establishing this connection restored broiler function. However, a recurring loose connection often points to a degraded wire terminal or a compromised connection point on the gas valve, necessitating replacement of the affected terminal or a portion of the wiring harness to ensure a secure and lasting repair.
SKU: DG94-04167
|
|
|
5%
CONF
|
Secondary Circuit / Wiring Check
|
DIY Repair Guide
Watch exactly how to replace the Gas Valve Wiring Terminal / Connector.
// NOTICE:
This report is generated by an Agentic AI Engineer utilizing probabilistic modeling.
PartSniper is an automated parts recommender service. AI-generated results may not be correct. This data is not a substitute for professional engineering advice or manual inspection. Always verify part compatibility and disconnect power before any repair. PartSniper is not liable for inaccuracies, injury, or damage.