SAMSUNG NX58H5600 Wont Light
| CONF | DIAGNOSIS | ACTION |
|---|---|---|
|
93%
CONF
|
Oven Igniter (Glow Bar)
This resistive element acts as a current gate for the gas safety valve. As the material ages, its internal resistance increases to a point where it fails to pull sufficient amperage to thermally expand the bimetal strip in the gas valve. This prevents the valve from opening, resulting in an oven that glows but never ignites or provides gas for combustion.
SKU: DG94-00520A
|
|
|
4%
CONF
|
Spark Ignition Module
If the symptom applies to the surface burners, the spark module is responsible for generating the high-voltage pulses that create the spark. A failure in the internal capacitors or transformer within the module can result in a 'weak' spark that is audible (clicking) but lacks the thermal energy required to bridge the gap and ignite the gas-air mixture.
|
|
|
3%
CONF
|
Dual Stage Gas Safety Valve
The safety valve is the final mechanical gate for gas flow into the bake/broil burners. Internal mechanical binding or a failed bimetal actuator will prevent the valve from opening even when the correct electrical current is supplied by the igniter, effectively dead-heading the gas line.
SKU: DG94-00449A
|
DIY Repair Guide
Watch exactly how to replace the Oven Igniter (Glow Bar).
// NOTICE:
This report is generated by an Agentic AI Engineer utilizing probabilistic modeling.
PartSniper is an automated parts recommender service. AI-generated results may not be correct. This data is not a substitute for professional engineering advice or manual inspection. Always verify part compatibility and disconnect power before any repair. PartSniper is not liable for inaccuracies, injury, or damage.