SAMSUNG RANGE FLEX DUO BURNER Not Lighting
| CONF | DIAGNOSIS | ACTION |
|---|---|---|
|
86%
CONF
|
Spark Igniter Electrode
The electrode is responsible for generating the high-voltage arc that ignites the gas. Over time, the ceramic insulator can crack or become fouled with grease and carbon, causing the spark to ground out before reaching the burner head. Replacing the individual electrode restores the path of least resistance for the spark.
|
VIEW ON AMAZON
#CommissionsEarned
|
|
8%
CONF
|
Burner Ignition Switch Assembly
This wiring harness sits on the burner valves and sends the signal to the spark module when the knob is turned to the 'Lite' position. Samsung ranges frequently suffer from grease ingress into these switches, which prevents the electrical contact from closing and results in a 'no-click' condition for specific burners.
SKU: DG96-00110E
|
VIEW ON AMAZON
#CommissionsEarned
|
|
6%
CONF
|
Spark Re-ignition Module
The spark module is the central control unit that transforms low voltage into high-voltage pulses for all burners. If the range has power and the switches are functional but no burners are sparking (or if they spark continuously), the internal circuitry of this module has likely failed.
|
VIEW ON AMAZON
#CommissionsEarned
|
DIY Repair Guide
Watch exactly how to replace the Spark Igniter Electrode.
// NOTICE:
This report is generated by an Agentic AI Engineer utilizing probabilistic modeling.
PartSniper is an automated parts recommender service. AI-generated results may not be correct. This data is not a substitute for professional engineering advice or manual inspection. Always verify part compatibility and disconnect power before any repair. PartSniper is not liable for inaccuracies, injury, or damage.