SAMSUNG FRIDGE RF28R7351 Not Making Ice
| CONF | DIAGNOSIS | ACTION |
|---|---|---|
|
91%
CONF
|
Ice Maker Assembly
This is the primary harvest unit. It contains the tray, drive motor, and thermistor. In these models, the thermistor or the internal gears often fail due to constant moisture exposure caused by the 'Ice Room' frost issue, and replacing the entire assembly is the only way to ensure the sensors and harvest mechanics are back to factory spec.
SKU: DA97-15217D
|
|
|
5%
CONF
|
Food Grade RTV Sealant
This is the engineering-mandated fix for the root cause of the failure. It is used to seal the gaps between the ice room walls and the refrigerator cabinet. Without sealing these air leaks, warm air will continue to enter, causing the new ice maker to freeze over and fail within months.
|
|
|
4%
CONF
|
Auger Motor Assembly
The auger assembly houses the ice room fan. If the fan motor fails or is obstructed by ice, the ice room cannot reach the temperature required (typically below 10°F) to signal the ice maker to dump a tray, effectively stopping production even if the ice maker itself is functional.
SKU: DA97-12540G
|
DIY Repair Guide
Watch exactly how to replace the Ice Maker Assembly.
// NOTICE:
This report is generated by an Agentic AI Engineer utilizing probabilistic modeling.
PartSniper is an automated parts recommender service. AI-generated results may not be correct. This data is not a substitute for professional engineering advice or manual inspection. Always verify part compatibility and disconnect power before any repair. PartSniper is not liable for inaccuracies, injury, or damage.