SAMSUNG FRIDGE RF28R7201 Error Code 22E
| CONF | DIAGNOSIS | ACTION |
|---|---|---|
|
93%
CONF
|
Internal Evaporator Cover Assembly
Error 22E indicates a fan circuit error in the refrigerator compartment, often caused by the motor stalling or a failed feedback sensor. This assembly replaces the fan motor and the ducting, which is critical because the original panel often suffers from moisture saturation that causes the fan to fail via icing or electrical shorting. Installing the full assembly ensures the new motor is protected by fresh, dry insulation and updated seals.
SKU: DA97-19016A
|
|
|
5%
CONF
|
Evaporator Fan Motor
This is the specific DC motor responsible for circulating air over the refrigerator evaporator coils. If the error is strictly electrical (failed motor windings or internal hall sensor), replacing only this component will resolve the 22E code. However, it requires a manual teardown of the rear panel and does not address the underlying moisture issues that usually cause the motor to fail.
SKU: DA31-00287B
|
|
|
2%
CONF
|
Refrigerator Defrost Sensor
In cases where the 22E error is triggered by physical ice obstruction rather than a motor failure, a faulty thermistor may be misreading the evaporator temperature. This prevents the defrost heater from engaging long enough to clear ice, leading to mechanical interference with the fan blades. Replacing the sensor ensures the defrost logic is based on accurate temperature data.
SKU: DA32-00011C
|
DIY Repair Guide
Watch exactly how to replace the Internal Evaporator Cover Assembly.
// NOTICE:
This report is generated by an Agentic AI Engineer utilizing probabilistic modeling.
PartSniper is an automated parts recommender service. AI-generated results may not be correct. This data is not a substitute for professional engineering advice or manual inspection. Always verify part compatibility and disconnect power before any repair. PartSniper is not liable for inaccuracies, injury, or damage.