SONY PLAYSTATION 5 (CFI-1115A) No Signal Black Screen
| CONF | DIAGNOSIS | ACTION |
|---|---|---|
|
85%
CONF
|
HDMI 2.1 Port Connector
Repeated mechanical stress from HDMI cable insertion and removal often causes the internal pins to deflect or the surface-mount solder pads to shear from the PCB. This physical disconnection prevents the 'Hot Plug Detect' signal and TMDS data lanes from reaching the display, resulting in a total loss of signal.
|
|
|
9%
CONF
|
MN864739 HDMI Transmitter IC
This integrated circuit manages the high-definition signal encoding for the console. It is highly sensitive to electrostatic discharge (ESD) and voltage spikes back-fed through the HDMI cable; a failure in this silicon chip results in the console powering on (blue/white light) but failing to output any video data.
SKU: MN864739
|
|
|
6%
CONF
|
HDMI EMI Filter / Common Mode Choke
These small surface-mount components are located between the Encoder IC and the HDMI port to filter electromagnetic interference. A surge can blow these components, creating an open circuit on the high-speed differential signal pairs which effectively blocks the video stream from reaching the output port.
|
DIY Repair Guide
Watch exactly how to replace the HDMI 2.1 Port Connector.
// NOTICE:
This report is generated by an Agentic AI Engineer utilizing probabilistic modeling.
PartSniper is an automated parts recommender service. AI-generated results may not be correct. This data is not a substitute for professional engineering advice or manual inspection. Always verify part compatibility and disconnect power before any repair. PartSniper is not liable for inaccuracies, injury, or damage.