METABO HPT 36V MULTIVOLT BATTERY (BSL36A18) Not Charging
| CONF | DIAGNOSIS | ACTION |
|---|---|---|
|
92%
CONF
|
MultiVolt™ 18V/36V Lithium Ion Battery (5.0Ah/2.5Ah)
The internal Battery Management System (BMS) has engaged a permanent safety lockout due to an under-voltage condition in the lithium-ion cell stack. This firmware-level block prevents the charger from delivering current to potentially unstable cells that have dropped below the safe recovery voltage threshold (Deep Discharge). Because the BMS logic and cell-interconnects are factory-sealed and non-serviceable to maintain water and impact resistance, the battery assembly must be replaced.
SKU: 371751M
|
VIEW ON AMAZON
#CommissionsEarned
|
|
8%
CONF
|
Secondary Circuit / Wiring Check
Inspect wiring harness.
|
VIEW ON AMAZON
#CommissionsEarned
|
DIY Repair Guide
Watch exactly how to replace the MultiVolt™ 18V/36V Lithium Ion Battery (5.0Ah/2.5Ah).
// NOTICE:
This report is generated by an Agentic AI Engineer utilizing probabilistic modeling.
PartSniper is an automated parts recommender service. AI-generated results may not be correct. This data is not a substitute for professional engineering advice or manual inspection. Always verify part compatibility and disconnect power before any repair. PartSniper is not liable for inaccuracies, injury, or damage.