MAYTAG MVW6200KW Not Draining Water
| CONF | DIAGNOSIS | ACTION |
|---|---|---|
|
93%
CONF
|
Drain Pump Assembly
The drain pump in this model utilizes a permanent magnet motor that is susceptible to impeller separation and internal winding shorts. When the pump fails, it cannot generate the centrifugal force necessary to overcome the head pressure in the drain hose. Replacing the full assembly restores the mechanical evacuation capability of the system.
|
VIEW ON AMAZON
#CommissionsEarned
|
|
5%
CONF
|
Lid Lock Latch Assembly
The control board logic for the VMW platform interlocks the drain cycle with the lid lock status. If the solenoid fails to engage or the internal switch fails to provide continuity, the machine will skip the drain/spin sequence as a safety precaution. This part ensures the control board receives the necessary signal to energize the drain pump.
SKU: W11307244
|
VIEW ON AMAZON
#CommissionsEarned
|
|
2%
CONF
|
Pressure Transducer Hose
Sediment and detergent residue can clog the air chamber or the hose leading to the pressure sensor on the main control board. This creates an air-lock that prevents the sensor from detecting the tub's water level. Replacing or clearing this hose restores the pneumatic signal required for the controller to initiate the drain sequence.
SKU: WPW10500115
|
VIEW ON AMAZON
#CommissionsEarned
|
DIY Repair Guide
Watch exactly how to replace the Drain Pump Assembly.
// NOTICE:
This report is generated by an Agentic AI Engineer utilizing probabilistic modeling.
PartSniper is an automated parts recommender service. AI-generated results may not be correct. This data is not a substitute for professional engineering advice or manual inspection. Always verify part compatibility and disconnect power before any repair. PartSniper is not liable for inaccuracies, injury, or damage.