LG WASHTOWER Error Code De
| CONF | DIAGNOSIS | ACTION |
|---|---|---|
|
91%
CONF
|
Door Lock Switch Assembly
This electromechanical component contains the microswitch that signals the control board when the door is closed and the solenoid that locks it during a cycle. The 'dE' code occurs when the circuit remains open, often due to internal contact failure or a burned-out solenoid coil. Replacing the assembly restores the safety feedback loop required for the washer to begin operation.
SKU: EBF61315801
|
|
|
5%
CONF
|
Door Latch Striker
The striker is the plastic or metal hook mounted on the door that physically enters the lock assembly. If this hook is chipped, cracked, or misaligned, it cannot exert enough pressure on the internal lock lever to trigger the 'closed' signal. This is a common failure point due to repeated impact during door closing.
SKU: 4026ER4004B
|
|
|
4%
CONF
|
Washing Machine Door Gasket
If the rubber bellows (gasket) has become warped or has shifted out of position, it creates physical resistance that prevents the door from sitting flush against the lock assembly. This prevents the striker from reaching the depth necessary to engage the internal switches, resulting in a persistent door error even if the door appears closed.
SKU: MDS47123605
|
DIY Repair Guide
Watch exactly how to replace the Door Lock Switch Assembly.
// NOTICE:
This report is generated by an Agentic AI Engineer utilizing probabilistic modeling.
PartSniper is an automated parts recommender service. AI-generated results may not be correct. This data is not a substitute for professional engineering advice or manual inspection. Always verify part compatibility and disconnect power before any repair. PartSniper is not liable for inaccuracies, injury, or damage.