LG RANGE LRE3061 OVEN Not Heating
| CONF | DIAGNOSIS | ACTION |
|---|---|---|
|
86%
CONF
|
Oven Relay Power Board
This board contains the mechanical relays that switch 240V power to the bake, broil, and convection elements. In LG ranges, these relays are a common failure point where the internal contacts arc and weld or the solder joints on the PCB fail due to thermal cycling, preventing the elements from receiving voltage.
|
|
|
8%
CONF
|
Bake Heating Element
The bake element is the primary heat source for standard cooking. Over time, the internal resistive wire can develop a 'hot spot' and burn out, creating an open circuit. If the element shows no continuity when tested with a multimeter, it must be replaced to restore heating.
|
|
|
6%
CONF
|
Oven Temperature Sensor
The sensor (RTD) monitors the internal oven temperature by changing resistance. If the sensor is 'out of range' (showing high resistance suggesting the oven is already hot), the control board will never trigger the relays to send power to the heating elements.
SKU: EBG61305801
|
DIY Repair Guide
Watch exactly how to replace the Oven Relay Power Board.
// NOTICE:
This report is generated by an Agentic AI Engineer utilizing probabilistic modeling.
PartSniper is an automated parts recommender service. AI-generated results may not be correct. This data is not a substitute for professional engineering advice or manual inspection. Always verify part compatibility and disconnect power before any repair. PartSniper is not liable for inaccuracies, injury, or damage.