LG LDP6797ST Not Filling With Water
| CONF | DIAGNOSIS | ACTION |
|---|---|---|
|
93%
CONF
|
Water Inlet Valve
The inlet valve is an electromechanical solenoid that opens a diaphragm to allow water flow into the tub. Over time, the internal coil can fail electrically or the diaphragm can become calcified, preventing it from retracting under magnetic force. Replacing this component restores the mechanical flow path for water supply.
SKU: AJU72992603
|
|
|
4%
CONF
|
Float Switch Assembly
The float switch acts as a safety cutoff; if the float is stuck in the 'up' position due to debris or mechanical binding, the control board receives a signal that the tub is already full. This prevents the inlet valve from ever energizing. A new assembly ensures the circuit correctly reflects the actual water level.
SKU: 6611DD2001A
|
|
|
3%
CONF
|
Main Power Control Board
The control board contains the relay that sends line voltage to the water inlet valve. If the relay contacts have pitted or the logic circuit has failed, no power is sent to the fill system. This is considered the likely cause only after the valve and float switch are verified as functional.
SKU: EBR83353001
|
DIY Repair Guide
Watch exactly how to replace the Water Inlet Valve.
// NOTICE:
This report is generated by an Agentic AI Engineer utilizing probabilistic modeling.
PartSniper is an automated parts recommender service. AI-generated results may not be correct. This data is not a substitute for professional engineering advice or manual inspection. Always verify part compatibility and disconnect power before any repair. PartSniper is not liable for inaccuracies, injury, or damage.