LG LFXS26973S Ice Maker Frozen
| CONF | DIAGNOSIS | ACTION |
|---|---|---|
|
91%
CONF
|
Water Inlet Valve Assembly
A microscopic failure in the solenoid diaphragm allows water to seep through when the valve is supposed to be closed. This constant trickle freezes within the cold fill tube, eventually creating an ice plug that prevents water from reaching the tray. Replacing the valve restores the hydraulic seal and prevents ice dam formation.
SKU: AJU73212304
|
|
|
5%
CONF
|
Ice Maker Assembly
If the internal thermistor fails to accurately detect the temperature of the ice or the tray heater fails to release the cubes, the unit may attempt a fill cycle while ice is still present. This leads to an overflow condition that freezes the entire mechanical assembly into a solid block. Replacing the full assembly is the only reliable fix as the internal sensors are not individually serviceable.
SKU: AEQ73110210
|
|
|
4%
CONF
|
Ice Room Door Gasket
If the gasket surrounding the ice compartment or the ice chute door is torn or warped, warm humid air from the kitchen enters the freezer. This moisture instantly condenses and freezes onto the ice maker components, eventually causing the mechanism to seize or 'freeze' over with frost.
SKU: MDS64172919
|
DIY Repair Guide
Watch exactly how to replace the Water Inlet Valve Assembly.
// NOTICE:
This report is generated by an Agentic AI Engineer utilizing probabilistic modeling.
PartSniper is an automated parts recommender service. AI-generated results may not be correct. This data is not a substitute for professional engineering advice or manual inspection. Always verify part compatibility and disconnect power before any repair. PartSniper is not liable for inaccuracies, injury, or damage.