LENNOX ML14XC1 Not Cooling
| CONF | DIAGNOSIS | PART MATCH | ACTION |
|---|---|---|---|
|
91%
CONF
|
Dual Run Capacitor
The capacitor stores electrical energy to provide the necessary torque for the compressor and fan motor to start. In the ML14XC1, thermal stress causes the internal metallized film to degrade, resulting in an open circuit or insufficient capacitance. When this fails, the compressor will hum but fail to turn over, preventing the refrigeration cycle from initiating.
|
|
VIEW ON AMAZON
#CommissionsEarned
|
|
5%
CONF
|
Definite Purpose Contactor
The contactor acts as a high-voltage relay that closes when the thermostat calls for cooling. Over time, the silver-cadmium contacts can become 'pitted' or charred from electrical arcing, creating high resistance or a total break in the circuit. This prevents the outdoor unit from receiving the 240V power required for operation.
|
|
VIEW ON AMAZON
#CommissionsEarned
|
|
4%
CONF
|
Condenser Fan Motor
The fan motor is responsible for pulling air through the condenser coils to dissipate heat. If the motor bearings seize or the internal windings fail due to moisture ingress, the unit will overheat rapidly, causing the compressor to trip its internal thermal overload and cease cooling to protect the system from catastrophic pressure spikes.
|
|
VIEW ON AMAZON
#CommissionsEarned
|
DIY Repair Guide
Watch exactly how to replace the Dual Run Capacitor.