KENMORE ELITE 795 SERIES Not Making Ice
| CONF | DIAGNOSIS | ACTION |
|---|---|---|
|
93%
CONF
|
Ice Maker Assembly
This assembly houses the harvest motor and the tray thermistor. In these LG-manufactured units, the motor often stalls or the internal sensor fails to detect the proper freezing temperature, preventing the unit from initiating the twist-and-dump cycle. Replacing the entire assembly is the only reliable fix as the internal electronics are not individually serviceable.
SKU: AEQ73110205
|
|
|
4%
CONF
|
Water Inlet Valve
The water inlet valve utilizes an electromagnetic solenoid to open a diaphragm for a timed fill. If the coil fails or if sediment from the water line clogs the internal screen, the ice maker will cycle 'dry' without water ever reaching the tray. This component is the primary interface between the home's plumbing and the appliance's internal fluid path.
SKU: AJU72902601
|
|
|
3%
CONF
|
Refrigerator Water Filter
A severely clogged filter creates a pressure drop across the internal plumbing. If the hydraulic pressure falls below approximately 20 PSI, the water inlet valve may not fully actuate or may deliver an insufficient volume of water during the timed fill cycle, causing the ice maker to fail to produce or to produce hollow/small cubes.
SKU: ADQ36006101
|
DIY Repair Guide
Watch exactly how to replace the Ice Maker Assembly.
// NOTICE:
This report is generated by an Agentic AI Engineer utilizing probabilistic modeling.
PartSniper is an automated parts recommender service. AI-generated results may not be correct. This data is not a substitute for professional engineering advice or manual inspection. Always verify part compatibility and disconnect power before any repair. PartSniper is not liable for inaccuracies, injury, or damage.