KENMORE COLDSPOT 106 Error Code 22E
| CONF | DIAGNOSIS | ACTION |
|---|---|---|
|
93%
CONF
|
Fresh Food Evaporator Fan Motor
The 22E code specifically identifies a communication breakdown between the evaporator fan and the control board. The internal Hall effect sensor within the motor, which provides tachometer feedback, has likely failed due to moisture-induced corrosion or mechanical seizure. Replacing the motor restores the feedback loop necessary for the board to verify airflow.
SKU: W11221703
|
|
|
5%
CONF
|
Main Electronic Control Board
If replacing the fan motor does not clear the 22E code, the logic circuit on the main PCB responsible for interpreting DC pulse-width modulation (PWM) signals has been compromised. This occurs when a short in the fan motor back-feeds voltage into the low-voltage communication rail of the processor.
SKU: W11035841
|
|
|
2%
CONF
|
Fresh Food Thermistor
While 22E is primarily a fan error, an out-of-range thermistor can cause the control board to drive the fan at inappropriate speeds or durations, eventually causing a firmware hang that defaults to a communication error.
SKU: WP2188819
|
DIY Repair Guide
Watch exactly how to replace the Fresh Food Evaporator Fan Motor.
// NOTICE:
This report is generated by an Agentic AI Engineer utilizing probabilistic modeling.
PartSniper is an automated parts recommender service. AI-generated results may not be correct. This data is not a substitute for professional engineering advice or manual inspection. Always verify part compatibility and disconnect power before any repair. PartSniper is not liable for inaccuracies, injury, or damage.