KENMORE 74025 (795.74025) Error Code 22E
| CONF | DIAGNOSIS | ACTION |
|---|---|---|
|
90%
CONF
|
Condenser Fan Motor
The 22E code is a specific diagnostic for the condenser fan motor circuit. The motor's internal Hall effect sensor or the motor windings themselves often fail due to the high-heat environment and constant operation required to cool the condenser coils. Replacing the motor restores the feedback signal to the main control board, clearing the error.
SKU: EAU61644102
|
VIEW ON AMAZON
#CommissionsEarned
|
|
6%
CONF
|
Main Power Control Board
If the fan motor has been replaced and the error persists, the motor driver logic on the Main PCB has likely failed. This occurs when a short-circuit in the fan motor back-feeds voltage into the control board, damaging the Pulse Width Modulation (PWM) controller responsible for regulating fan speed.
SKU: EBR78940615
|
VIEW ON AMAZON
#CommissionsEarned
|
|
4%
CONF
|
Condenser Fan Blade
Mechanical obstruction or physical damage to the fan blade can lead to a seized motor or inconsistent RPM readings. If the blade is cracked or the center hub is stripped, the motor may spin without moving air, or the imbalance may cause the motor to fail prematurely.
SKU: 5901JA1013A
|
VIEW ON AMAZON
#CommissionsEarned
|
DIY Repair Guide
Watch exactly how to replace the Condenser Fan Motor.
// NOTICE:
This report is generated by an Agentic AI Engineer utilizing probabilistic modeling.
PartSniper is an automated parts recommender service. AI-generated results may not be correct. This data is not a substitute for professional engineering advice or manual inspection. Always verify part compatibility and disconnect power before any repair. PartSniper is not liable for inaccuracies, injury, or damage.