IROBOT ROOMBA J7+ Error 26 Airflow Low
| CONF | DIAGNOSIS | ACTION |
|---|---|---|
|
92%
CONF
|
Internal Suction Fan Motor Module
When cleaning the filter fails to clear Error 26, the failure is localized to the vacuum motor's ability to generate sufficient CFM. Over time, fine particulate matter can bypass the filter and infiltrate the motor bearings or settle on the centrifugal impeller blades, increasing rotational mass and friction. This results in the motor failing to reach the nominal RPM required by the logic board to verify proper airflow, triggering the safety shutdown.
|
|
|
8%
CONF
|
Secondary Circuit / Wiring Check
Inspect wiring harness.
|
DIY Repair Guide
Watch exactly how to replace the Internal Suction Fan Motor Module.
// NOTICE:
This report is generated by an Agentic AI Engineer utilizing probabilistic modeling.
PartSniper is an automated parts recommender service. AI-generated results may not be correct. This data is not a substitute for professional engineering advice or manual inspection. Always verify part compatibility and disconnect power before any repair. PartSniper is not liable for inaccuracies, injury, or damage.