HAYWARD SUPER PUMP SP2610X15 Leaking Water

Pump Seal Repair Kit

This kit contains the mechanical shaft seal, which is the primary barrier preventing water from escaping the impeller housing along the motor shaft. The failure occurs when the ceramic/carbon faces of the seal wear down or crack, allowing pressurized water to bypass the shaft. Replacing the entire kit is necessary because the main housing O-ring and diffuser gasket take a 'set' under compression and rarely reseal correctly once the pump is disassembled for the shaft seal repair.

SKU: GOKIT3

CHECK PRICE #CommissionsEarned ✓ THIS FIXED IT

Mechanical Shaft Seal

This is the specific component responsible for the leak; it uses a spring-loaded bellows to maintain a watertight seal against the rotating impeller. If the pump was ever run without water, the resulting heat would have deformed the rubber bellows or cracked the ceramic ring, leading to a constant drip. This part is the granular root cause of water manifesting at the junction of the motor and pump body.

SKU: SPX1600Z2

CHECK PRICE #CommissionsEarned ✓ THIS FIXED IT

Housing Gasket / O-Ring

The large square-ring gasket seals the strainer housing to the seal plate. If the leak is appearing at the outer perimeter of the pump body rather than near the motor shaft, this gasket has likely suffered from chemical degradation or compression failure. This allows water to bypass the main housing seal under the high pressure generated by the impeller.

CHECK PRICE #CommissionsEarned ✓ THIS FIXED IT