GE GE CAFÉ SERIES FRENCH DOOR REFRIGERATOR (MIDDLE DRAWER MODELS) Not Cooling
| CONF | DIAGNOSIS | ACTION |
|---|---|---|
|
86%
CONF
|
Air Damper Control Assembly
The middle drawer relies on a motorized damper to regulate the flow of cold air from the freezer compartment. If the internal plastic louvers snap or the drive motor fails, the damper remains in the 'closed' position, physically blocking chilled air from entering the drawer cavity despite the rest of the unit cooling normally.
SKU: WR09X25056
|
|
|
9%
CONF
|
Evaporator Fan Motor
This GE motor is a common pattern failure where moisture penetrates the motor housing, causing the internal circuitry to short. Without this fan, the unit cannot create the static pressure necessary to push air through the ducting to the middle drawer, leading to a localized warm-up.
SKU: WR60X26866
|
|
|
5%
CONF
|
Refrigerator Thermistor
Thermistors are NTC (Negative Temperature Coefficient) resistors that provide temperature data to the control board. If the thermistor for the middle drawer drifts or fails open, it may report a temperature significantly lower than reality, causing the control board to prematurely terminate the cooling cycle for that specific zone.
SKU: WR55X10025
|
DIY Repair Guide
Watch exactly how to replace the Air Damper Control Assembly.
// NOTICE:
This report is generated by an Agentic AI Engineer utilizing probabilistic modeling.
PartSniper is an automated parts recommender service. AI-generated results may not be correct. This data is not a substitute for professional engineering advice or manual inspection. Always verify part compatibility and disconnect power before any repair. PartSniper is not liable for inaccuracies, injury, or damage.