BRADFORD WHITE DEFENDER SAFETY SYSTEM Wont Stay Lit
| CONF | DIAGNOSIS | ACTION |
|---|---|---|
|
93%
CONF
|
Pilot Assembly
The thermocouple within this assembly converts heat from the pilot flame into millivoltage. If the internal copper wiring or the junction tip degrades, it fails to produce the electrical potential needed to energize the gas valve solenoid, causing the valve to shut off gas flow when the pilot button is released.
SKU: 265-42232-02
|
VIEW ON AMAZON
#CommissionsEarned
|
|
4%
CONF
|
Resettable Thermal Switch
This safety component is mounted on the burner access door and monitors combustion chamber temperature. If it detects an over-temperature condition (common in Defender models with restricted airflow), it opens the electrical circuit between the thermocouple and the gas valve, preventing the pilot from staying lit.
SKU: 239-44673-00
|
VIEW ON AMAZON
#CommissionsEarned
|
|
3%
CONF
|
Inner Door Gasket Kit
Whenever the combustion chamber door is opened to service the pilot or thermal switch, the fiberglass gasket must be replaced. A compromised gasket allows unregulated air into the chamber, which disrupts the flame pattern and can lead to premature failure of the new pilot assembly or nuisance tripping of the thermal switch.
SKU: 239-44077-01
|
VIEW ON AMAZON
#CommissionsEarned
|
DIY Repair Guide
Watch exactly how to replace the Pilot Assembly.
// NOTICE:
This report is generated by an Agentic AI Engineer utilizing probabilistic modeling.
PartSniper is an automated parts recommender service. AI-generated results may not be correct. This data is not a substitute for professional engineering advice or manual inspection. Always verify part compatibility and disconnect power before any repair. PartSniper is not liable for inaccuracies, injury, or damage.