BOSCH SHXM4AY55 Not Filling With Water
| CONF | DIAGNOSIS | ACTION |
|---|---|---|
|
93%
CONF
|
Water Inlet Valve
The solenoid coil within the valve often suffers from thermal fatigue or an open circuit, preventing the magnetic field required to lift the internal diaphragm. In high-mineral environments, calcification can also mechanically bind the plunger, blocking water flow even when the coil is energized. Replacing the valve restores the electromechanical path for water entry during the fill phase.
SKU: 00622058
|
VIEW ON AMAZON
#CommissionsEarned
|
|
4%
CONF
|
Dishwasher Float Switch
This safety component acts as a 'normally closed' circuit that opens when the water level rises too high. If the switch fails electrically (high resistance) or is mechanically jammed by debris in the sump area, the control board interprets this as an overfill condition and immediately cancels the fill sequence to prevent flooding.
SKU: 00165256
|
VIEW ON AMAZON
#CommissionsEarned
|
|
3%
CONF
|
Power Module (Control Board)
The power module contains the logic and relays/triacs that switch line voltage to the inlet valve. If the specific circuit path for the water valve is damaged due to a voltage spike or component aging, the valve will remain dormant despite the rest of the machine functioning correctly. This is the final diagnostic step if the valve and float switch are confirmed functional.
SKU: 11030200
|
VIEW ON AMAZON
#CommissionsEarned
|
DIY Repair Guide
Watch exactly how to replace the Water Inlet Valve.
// NOTICE:
This report is generated by an Agentic AI Engineer utilizing probabilistic modeling.
PartSniper is an automated parts recommender service. AI-generated results may not be correct. This data is not a substitute for professional engineering advice or manual inspection. Always verify part compatibility and disconnect power before any repair. PartSniper is not liable for inaccuracies, injury, or damage.