BOSCH SERIES 6 Error Drain Pump Clog
| CONF | DIAGNOSIS | ACTION |
|---|---|---|
|
85%
CONF
|
Drain Pump Filter/Trap
The filter acts as a physical barrier to protect the pump impeller. Over cycles, lint and foreign debris accumulate, reducing the cross-sectional area of the intake. This creates significant fluid resistance, preventing the pump from achieving the necessary flow rate to empty the drum within the software-defined timeout period.
SKU: 00647920
|
|
|
10%
CONF
|
Drain Pump Assembly
The pump uses a magnetic synchronous motor which can fail mechanically if the internal bearings wear or if the impeller becomes decoupled from the motor shaft. If the impeller cannot maintain sufficient rotational velocity against the weight of the water column, it fails to generate the centrifugal force required for evacuation.
SKU: 00145212
|
|
|
5%
CONF
|
Drain Hose
Corrugated hoses are susceptible to sediment buildup and internal kinks. A partial blockage or a sharp bend increases the static head pressure, forcing the drain pump to operate outside of its performance curve, resulting in the E18 timeout error.
SKU: 00673453
|
DIY Repair Guide
Watch exactly how to replace the Drain Pump Filter/Trap.
// NOTICE:
This report is generated by an Agentic AI Engineer utilizing probabilistic modeling.
PartSniper is an automated parts recommender service. AI-generated results may not be correct. This data is not a substitute for professional engineering advice or manual inspection. Always verify part compatibility and disconnect power before any repair. PartSniper is not liable for inaccuracies, injury, or damage.