BOSCH DISHWASHER 800 SERIES LIGHTS Flashing
| CONF | DIAGNOSIS | ACTION |
|---|---|---|
|
85%
CONF
|
Dishwasher Door Latch Assembly
The flashing light on Bosch 800 series units is the standard indicator that the control module detects an open circuit at the door sensor. This latch assembly contains the microswitch that confirms the door is closed; when the internal spring or switch fails, the unit refuses to engage the wash motor and flashes the status light to prompt the user to close the door. Replacing the latch ensures the electrical connection is maintained throughout the cycle.
SKU: 00630633
|
|
|
15%
CONF
|
Control Module
If the door latch is confirmed to be mechanically sound and providing continuity, the control module's input circuit may be failed. This prevents the board from processing the 'closed' signal even when the door is physically latched, though this is a significantly less common failure mode than the latch itself.
SKU: 12022416
|
DIY Repair Guide
Watch exactly how to replace the Dishwasher Door Latch Assembly.
// NOTICE:
This report is generated by an Agentic AI Engineer utilizing probabilistic modeling.
PartSniper is an automated parts recommender service. AI-generated results may not be correct. This data is not a substitute for professional engineering advice or manual inspection. Always verify part compatibility and disconnect power before any repair. PartSniper is not liable for inaccuracies, injury, or damage.