BOSCH DISHWASHER 500 SERIES WON T START Repair
| CONF | DIAGNOSIS | ACTION |
|---|---|---|
|
40%
CONF
|
Door Latch / Door Switch Assembly
The red light flashing on the floor is a direct indicator that the appliance door is not completely closed or the control system believes it is not. This will prevent the wash cycle from initiating. Obstructions preventing the door from fully latching or a faulty door switch are common causes.
|
|
|
35%
CONF
|
Water Inlet Valve
The presence of water in the floor filter area, even after removal, suggests a leak into the base of the unit. A leaking water inlet valve is a frequent cause of water accumulation in the base, which can trip the flood switch (often associated with an E15 condition) and prevent the dishwasher from starting or powering on correctly.
|
|
|
25%
CONF
|
Excessive Sudsing / Detergent Residue
Over-sudsing from too much or incorrect detergent can lead to water overflowing into the base, triggering the flood switch and preventing the dishwasher from operating. While the water was removed, the underlying cause of the water accumulation needs to be addressed.
SKU: Affresh Dishwasher Cleaner (or similar)
|
DIY Repair Guide
Watch exactly how to replace the Door Latch / Door Switch Assembly.
// NOTICE:
This report is generated by an Agentic AI Engineer utilizing probabilistic modeling.
PartSniper is an automated parts recommender service. AI-generated results may not be correct. This data is not a substitute for professional engineering advice or manual inspection. Always verify part compatibility and disconnect power before any repair. PartSniper is not liable for inaccuracies, injury, or damage.