BETAFPV METEOR75 PRO Pro Motor Disconnected
| CONF | DIAGNOSIS | ACTION |
|---|---|---|
|
92%
CONF
|
F4 1S 5A AIO Brushless Flight Controller
The Meteor75 Pro uses an integrated AIO board where the ESCs are soldered directly to the main PCB. A 'Motor Disconnected' error indicates a failure in the power-stage MOSFETs or the ESC MCU for that specific motor channel, often caused by a current spike during a propeller stall. Since these are high-density surface-mount components, the entire flight controller assembly must be replaced to restore electrical continuity to the motor phases.
|
|
|
8%
CONF
|
Secondary Circuit / Wiring Check
Inspect wiring harness.
|
DIY Repair Guide
Watch exactly how to replace the F4 1S 5A AIO Brushless Flight Controller.
// NOTICE:
This report is generated by an Agentic AI Engineer utilizing probabilistic modeling.
PartSniper is an automated parts recommender service. AI-generated results may not be correct. This data is not a substitute for professional engineering advice or manual inspection. Always verify part compatibility and disconnect power before any repair. PartSniper is not liable for inaccuracies, injury, or damage.